| Serial Number | parameter Location | parameter Name | parameter Description |
|---|---|---|---|
| 1 | uiStatus[0]: bit 0 | GPS positioning status | 0 invalid 1 valid |
| 2 | uiStatus[0]:1 bit | ACC Status | 0 means ACC is off 1 means ACC is on |
| 3 | uiStatus[0]:2 bits | ACC signal abnormal alarm (platform) | alarm code: 326 |
| 4 | uiStatus[0]:3 bits | location information reporting abnormal alarm (platform) | alarm code: 327 |
| 5 | uiStatus[0]:4 bits | fatigue Warning (Platform) | alarm code: 1109 |
| 6 | uiStatus[0]:5 bits | positive rotation state | 0 invalid 1 forward |
| 7 | uiStatus[0]:6 bits | reverse State | 0 Invalid 1 Reverse |
| 8 | uiStatus[0]:7 bits | GPS Antenna Status | 0 does not exist 1 exists |
| 9 | uiStatus[0]:8- 9 | hard Drive Status | 0 does not exist, 1 exists, 2 power down |
| 10 | uiStatus[0]:10- 12 bits | 3G module status | 0 module does not exist, 1 no signal, 2 poor signal, 3 normal signal, 4 good signal, 5 excellent signal |
| 11 | uiStatus[0]:13 bits | quiescent state | 1 means still |
| 12 | uiStatus[0]:14 bits | overspeed state | 1 indicates overspeed |
| 13 | uiStatus[0]: bit 15 | supplementary status | 1 means GPS supplement |
| 14 | uiStatus[0]:16- bit | low speed state | 1 indicates low speed |
| 15 | uiStatus[0]:17 bits | night State | 0 means daytime and 1 means nighttime (overspeed is judged before it is effective) |
| 16 | uiStatus[0]:18 bits | overload state | 0 Normal 1 Overload |
| 17 | uiStatus[0]:19 bits | reserved bit | not used |
| 18 | uiStatus[0]:20 bits | IO1 Status | 1 indicates alarm |
| 19 | uiStatus[0]: bit 21 | IO2 status | 1 indicates alarm |
| 20 | uiStatus[0]: bit 22 | IO3 Status | 1 indicates alarm |
| 21 | uiStatus[0]: bit 23 | IO4 Status | 1 indicates alarm |
| 22 | uiStatus[0]:24- bit | IO5 Status | 1 indicates alarm |
| 23 | uiStatus[0]:25 bits | IO6 Status | 1 indicates alarm |
| 24 | uiStatus[0]: bit 26 | lane deviation warning | alarm code: 431 |
| 25 | uiStatus[0]:27 bits | tire pressure warning | alarm code: 432 |
| 26 | uiStatus[0]:28 bits | drive 2 status | 1 means effective |
| 27 | uiStatus[0]:29- 30 | hard Disk 2 Status | 0 does not exist, 1 exists, 2 power down |
| 28 | uiStatus[0]:31 bit | hard disk status (GPS device used) | 1 is invalid and 0 is valid (the status of 1 and 2 should be judged again) |
| serial Number | parameter Location | parameter Name | parameter Description |
|---|---|---|---|
| 1 | uiStatus[1]: bit 0 | video signal loss alarm (video logo) | alarm code: 4 |
| 2 | uiStatus[1]:1 digit | video signal occlusion alarm (video logo) | alarm code: 5 |
| 3 | uiStatus[1]:2 | storage unit fault alarm (video logo) | first Channel: 39 Second Channel: 40 Others: 10 |
| 4 | uiStatus[1]:3 digits | other video equipment fault alarm (video logo) | alarm code: 244 |
| 5 | uiStatus[1]:4 bits | abnormal driving behavior alarm (video logo) | alarm code: 248 |
| 6 | uiStatus[1]:5 | special alarm video reaches storage threshold alarm (video logo) | alarm code: 245 |
| 7 | uiStatus[1]:6 | rapid acceleration | alarm code: 246 |
| 8 | uiStatus[1]:7 | rapid deceleration | alarm code: 247 |
| 9 | uiStatus[1]:8 bits | daily flow warning | 1 indicates early warning |
| 10 | uiStatus[1]:9 | daily flow exceeds | 1 means more |
| 11 | uiStatus[1]:10 | monthly traffic warning | 1 indicates early warning |
| 12 | uiStatus[1]:11 | monthly flow exceeds | 1 means more |
| 13 | uiStatus[1]:12- 13 | protocol version identification | 0 indicates the old protocol 0x 01 indicates the new protocol is valid 0x 10 and 0x 11 reserved |
| 14 | uiStatus[1]:14 | channel Recording Status Valid Flag | 1 valid 0 invalid |
| 15 | uiStatus[1]:15battery voltage too low | alarm code: 205(808 battery undervoltage) | |
| 16 | uiStatus[1]:16 bits | bad battery | alarm code: 206(808 main power failure) |
| 17 | uiStatus[1]:17 | engine Status | reserved bit |
| 18 | uiStatus[1]:18 | last Valid GPS Message Flag | the status shows that the positioning is invalid, but the GPS can be positioned on the map. |
| 19 | uiStatus[1]:19 | load status | 0 No- load state 1 Overload state |
| 20 | uiStatus[1]:20 | operation status | 1 Shutdown status (808) |
| 21 | uiStatus[1]:21 | latitude and longitude encryption status | 0 Not encrypted 1 Encrypted (808) |
| 22 | uiStatus[1]:22 | oil circuit status | 0 Normal 1 Oil circuit disconnected (808) |
| 23 | uiStatus[1]:23 | circuit Status | 0 Normal 1 Circuit Open (808) |
| 24 | uiStatus[1]:24 | door status | 0 Unlock 1 Lock (808) |
| 25 | uiStatus[1]:25 | area overspeed alarm (generated by platform) | alarm code: 300 |
| 26 | uiStatus[1]:26 | zone low speed alarm (generated by platform) | alarm code: 301 |
| 27 | uiStatus[1]:27 | into the area alarm (generated by the platform) | alarm code: 302 |
| 28 | uiStatus[1]:28 | line offset (platform generated) | alarm code: 303 |
| 29 | uiStatus[1]:29 | time period overspeed alarm (generated by the platform) | NON- NIGHT: 304 NIGHT: 314 |
| 30 | uiStatus[1]:30 | time period low speed alarm (generated by platform) | alarm code: 305 |
| 31 | uiStatus[1]:31 | fatigue driving (platform generation) | alarm code: 306 |
| serial Number | parameter Location | parameter Name | parameter Description |
|---|---|---|---|
| 1 | uiStatus[2]:0- 7 | channel video loss status | each bit represents a channel, 1 indicates video loss |
| 2 | uiStatus[2]:8- 15 | channel Recording Status | each represents a channel, and 1 indicates that video is being recorded. |
| 3 | uiStatus[2]:16 bits | rollover Warning | alarm code: 433 |
| 4 | uiStatus[2]:17 | road transport card IC card module failure | alarm code: 712 |
| 5 | illegal driving | alarm code: 713 | |
| 6 | uiStatus[2]:19 | right Turn Blind Abnormal Alarm | alarm code: 714 |
| 7 | uiStatus[2]:20 | half load condition | 1 means half load (required and uiStatus[1]:19- bit combined judgment) |
| 8 | uiStatus[2]:21 | door 1 status (front door) | 0 off 1 on |
| 9 | uiStatus[2]:22 | door 2 Status (Middle Door) | 0 off 1 on |
| 10 | uiStatus[2]:23 | door 3 status (rear door) | 0 off 1 on |
| 11 | uiStatus[2]:24 | door 4 Status (Driver Seat Door) | 0 off 1 on |
| 12 | uiStatus[2]:25 | door 5 Status (Custom) | 0 off 1 on |
| 13 | uiStatus[2]:26 | GPS satellite positioning status | 0 Positioning without GPS satellites 1 Positioning with GPS satellites |
| 14 | uiStatus[2]:27 | beidou satellite positioning status | 0 Positioning without Beidou satellite 1 Positioning with Beidou satellite |
| 15 | uiStatus[2]:28 | GLONASS satellite positioning status | 0 Positioning without GLONASS satellites 1 Positioning with GLONASS satellites |
| 16 | uiStatus[2]:29 | Galileo satellite positioning status | 0 Positioning without Galileo satellites 1 Positioning with Galileo satellites |
| 17 | uiStatus[2]:30 | early morning operation alarm (platform) | 0 Normal 1 Alarm |
| 18 | uiStatus[2]:31 | abnormal driving state (no travel in mountain area) | 0 Normal 1 Alarm |
| serial Number | parameter Location | parameter Name | parameter Description | ||||
|---|---|---|---|---|---|---|---|
| 1 | uiStatus[3]: bit 0 | overspeed Warning (New GB Agreement) | alarm code: 428 (valid for new GB agreement) | ||||
| 2 | uiStatus[3]:1 digit | fatigue driving warning (new national standard agreement) | alarm code: 429 (valid for new GB agreement) | ||||
| 3 | uiStatus[3]:2 | forward collision warning (new national standard agreement) | alarm code: 430 (valid for new GB agreement) | ||||
| 4 | uiStatus[3]:3 | emergency alarm | alarm code: 2 | ||||
| 5 | uiStatus[3]:4 digits | area overspeed alarm | alarm code: 200 | ||||
| 6 | uiStatus[3]:5 | fatigue driving alarm | alarm code: 49 | ||||
| 7 | uiStatus[3]:6 | warning | alarm code: 201 | 8 | uiStatus[3]:7 | GNSS module fault | alarm code: 202 |
| 9 | uiStatus[3]:8 bits | GNSS antenna not connected or cut | alarm code: 203 | ||||
| 10 | uiStatus[3]:9 | GNSS antenna short circuit | alarm code: 204 | ||||
| 11 | uiStatus[3]:10 | terminal LCD or Display Failure | alarm code: 207 | ||||
| 12 | uiStatus[3]:11 | TTS module fault | alarm code: 208 | ||||
| 13 | uiStatus[3]:12 | camera failure | alarm code: 209 | ||||
| 14 | uiStatus[3]:13 | cumulative driving overtime of the day | alarm code: 210 | ||||
| 15 | uiStatus[3]:14 | overtime parking | alarm code: 14 | ||||
| 16 | uiStatus[3]:15 | into the area | alarm code: 211 | ||||
| 17 | uiStatus[3]:16 bits | route | alarm code: 212 | ||||
| 18 | uiStatus[3]:17 | insufficient or excessive travel time on the road section | alarm code: 213 | ||||
| 19 | uiStatus[3]:18 | route deviation alarm | alarm code: 214 | ||||
| 20 | uiStatus[3]:19 | vehicle VSS failure | alarm code: 215 | ||||
| 21 | uiStatus[3]:20 | abnormal fuel quantity of vehicle | alarm code: 216 | ||||
| 22 | uiStatus[3]:21 | vehicle stolen | alarm code: 217 | ||||
| 23 | uiStatus[3]:22 | illegal ignition of vehicles | alarm code: 8 | ||||
| 24 | uiStatus[3]:23 | illegal vehicle displacement | alarm code: 218 | ||||
| 25 | uiStatus[3]:24 | collision rollover alarm | alarm code: 219 | ||||
| 26 | uiStatus[3]:25 | overtime stop (generated by platform) | alarm code: 307 | ||||
| 27 | uiStatus[3]:26 | key point not reached alarm (generated by platform) | alarm code: 308 | ||||
| 28 | uiStatus[3]:27 | line overspeed alarm (generated by platform) | alarm code: 309 | ||||
| 29 | uiStatus[3]:28 | line low speed alarm (generated by platform) | alarm code: 310 | ||||
| 30 | uiStatus[3]:29 | road overspeed alarm (generated by platform) | alarm code: 311 | ||||
| 31 | uiStatus[3]:30 | out- of- area alarm (generated by the platform) | |||||
| 32 | uiStatus[3]:31- | bitkey point does not leave alarm (platform generated) | alarmcode: 308 |